 |
| Coil End Grinder AG series |
 |
| Adoption of Automatic cutting-in & grinding system by servo motor control (AG-5N, AG-12N) |
|
| 1.High accuracy in squareness and parallelism. 2.No inferiority due to seize on the grinding face. 3.Accuracy in free length is made stable by controling.  the grinding height through the measuring device.4.Partion wear of grinding wheel is few, leading economical running cost. 5.Overlapping work of "rough cutting –› finishing" is unnecessary since the coil end is completely ground in single stage.
|
 AG-12N |
| Specifications |
| Type | AG-3 | AG-5N | AG-12N | |
| wire dia. | mm | 0.3~3 | 0.3~5.0 | 3~12 |
| outside coil dia. | mm | 3~40 | 3~40 | 10~120 |
| spring length | mm | 5~150 | 5~150 | 10~350 |
| grinding wheel dia. | mm | 400(2 pcs) | 400(2 units) | 660(2 pcs) |
| spring loading plate dia. | mm | 250 | 420 | 580 |
| motor capacity | kW | 2.2(2 units) | 2.2(2 units) | 7.5(2 units) |
| outside dimension height×width×depth |
mm | 1930×460×430 | 2150×550×620 | 2880×920×1550 |
| net weight (approx.) | kg | 650 | 1500 | 2500 |
| *Ask Asahi-Seiki for the details of standard accessories and special accessories. |
 |
 |